How Do I Sync My Fireplace Remote?

How do you reset a Valor fireplace?

With a sharp object, press and hold the receiver’s reset button until you hear one short and one long beeps.

Release the reset button after the second beep.

3.

Within the subsequent 20 seconds, press the small ..

Why is my valor fireplace beeping?

Before you change the batteries, turn the fireplace and pilot off and let it cool. When three seconds of rapid fire beeps sound, it’s time to replace your receiver batteries.

How do you sync a remote?

How to Connect a Remote to a TVHold down the program button on the remote control for 3 seconds. This button mighty be displayed on the remote as “PRG.” When you have done this, the LED light on the remote control will turn on. … Press the “TV” button on the remote control to let the remote know it will be syncing with a TV.

Can I use my TV remote to control my cable box?

Instead of shuffling around, use the remote that came with your TV. … Using the universal remote feature, you can control cable and satellite boxes, home theater systems, and Blu-ray players.

How do I reset my set top box remote?

Reset Remote Control to Factory Default SettingsPress and hold the TV button.While holding it pressed, press the OK button for one second and release both buttons at the same time (all three of the TV, DVD and AUX buttons will flash, the TV button light will stay on).Press and hold the DELETE button for three seconds (the TV button blinks and stays off).More items…

Why is my electric fireplace not working?

Some electric fireplaces have a separate switch on the side that disables the heating element. Make sure that this switch is turned on or your electric fireplace will not produce heat. … Check electrical wiring and look for any loose connections. Make sure that the wire running to your thermostat is properly attached.

Why is my remote not working?

1 Check the Batteries of the Supplied Remote Low battery power can cause the remote to intermittently function, or not function at all. Lift the back cover up and away from the remote. Remove and re-insert the 2 batteries. Replace the back cover on the remote, and slide down to click it into place.

Can I add a remote to my gas fireplace?

Yes, you can add a remote to your gas log set after it’s been installed and the log set is already equipped with a millivolt valve. You may even be able to completely convert your gas log set to a remote control system with variable flame and thermostatic controls.

How do I change my fireplace from Celsius to Fahrenheit?

Changing Celsius to Fahrenheit, & vice versa, on the Flare 8-Button remote can be done by pressing the ON and Counter down button.

How do I sync my valor fireplace remote?

Turning the fireplace ON When using your remote control, hold down the OFF and large flame button simultaneously. Once you hear the beep to start the activation sequence, the buttons on the remote can be released. Once the pilot light ignites, the flames will turn to full fire and remain in “Manual Mode”.

How do I sync my remote to my cable box?

Open the Xfinity My Account app on your Apple or Android mobile device.Tap the TV icon, pick your TV Box, and then pick Setup a remote.Swipe to find the remote control model you need to program, and tap Continue.Pick TV or Audio/Other, and follow the programming instructions.

How do I reset my electric fireplace remote?

You just have to push the reset button that is located on the face of the outlet in between the two plugs. If your electric fireplace is plugged into an outlet that is controlled by a wall switch, make sure the wall switch is flipped to the ON position.

How do I pair my remote to my set top box remote?

You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. Press and hold the STB button, then press the corresponding code while still holding the STB button. Release the STB button when done. – If successful, the STB button LED will turn RED and blink twice.

How do you turn on an electric fireplace without the remote?

How To Turn On An Electric Fireplace (Without A Remote)Ensure that your electric fireplace is plugged in at the wall and turned on.The controls are located behind this cover on my electric fireplace.The controls that work the heater on my electric fireplace.The switch that turns on the low heat setting.More items…•