Quick Answer: How Many Coats Of Drylok Should I Do?

How do you prepare walls for Drylok?

Prepare The Surface.

Before applying DRYLOK® Masonry Waterproofer, clean the surface thoroughly with a wire brush to remove all loose and broken mortar, dirt, dust, efflorescence (salt-deposits) from all surfaces to be painted.

Old paint must be removed by wire-brushing, sand-blasting or by using other suitable means..

Should I use Drylok in my basement?

DO NOT PAINT YOUR WALLS, even with Drylok or waterproofing paint. … Also, do not attach insulation directly to the foundation walls. It behaves as a moisture trap and can also hide structural problems and cracks in the foundation. Bottom line: basement walls need to breathe too.

How long does it take for Drylok to cure?

2-3 hoursDry time: 2-3 hours. Coats: minimum of 2 for Warranty Coverage. Recoat time: 2-3 hours. Optional: After 24 hours, DRYLOK® Original Masonry Waterproofer may be topcoated with a good quality latex paint for decorative purposes.

How much Drylok do I need?

Both DRYLOK® Original Masonry Waterproofer and DRYLOK® Extreme Masonry Waterproofer cover 75-100 square feet per gallon, and DRYLOK® Floor & Wall Masonry Waterproofer covers 90-100 square feet per gallon, depending on the porosity of the surface.

Does Drylok extreme work?

The UGL Drylok Extreme system is guaranteed to work for up to 15 feet of head or water pressure and for up to 15 years. It is not a crystalline system—it’s more paint-like—although the manufacturer states that it does penetrate the concrete. … A double-coating of UGL Drylok Extreme that still weeps water.

What’s the difference between Drylok and Drylok extreme?

Drylok® is probably one of the most popular brands of basement waterproofing paint on the market. … The difference between the two products is the original Drylok® withstands 10 lbs of thermostatic pressure while Drylok Extreme withstands 15 lbs of hydrostatic pressure.

How do you load a Drylok fast plug?

Mix 3 parts DRYLOK® Fast Plug® and 1 part water thoroughly until you achieve a putty or heavy troweling consistency. This mixture will set in 3-5 minutes. The use of colder water will retard the setting time. Mix only enough for immediate use due to the quick setting time.

Does Drylok reduce humidity?

DRYLOK® Extreme Masonry Waterproofer is a product that you can use to help reduce moisture from your foundation walls from making your basement into a humid jungle atmosphere.

What is the best way to apply Drylok?

Apply the first coat to bare masonry with a three-quarter-inch nap roller, a DRYLOK® Brush or a quality nylon bristle brush. If using a brush, work the DRYLOK® Extreme Masonry Waterproofer into the pores of the masonry, making sure to fill all pores and pinholes.

How do you clean up Drylok?

Pour, brush or spray UGL DRYLOK Concrete Cleaner & Degreaser on the area to be cleaned. Allow cleaner to remain on the surface for 5 minutes, then thoroughly flush with water. For tough stains apply the Cleaner & Degreaser, let it stand for 5-10 minutes, then scrub with a stiff brush or broom and rinse with water.

Is Drylok supposed to be thick?

So, when you open a can of DRYLOK® Original or DRYLOK® Extreme, you’ll realize how thick this product really is. Resist the temptation to water it down (do not thin)! The viscosity of the formula is your friend.

Does Drylok cause mold?

Drylok is a product that is used to stop water seepage on interior masonry walls. … When he called UGL (the company that makes Drylok) to complain, they told him he didn’t have a claim against them because Drylok says right on the label that it can cause mold to grow.