Quick Answer: What Is The Thickest Speaker Wire?

Is thicker speaker wire better?

Thicker wires are better: It’s true that for long runs, thicker wires are better at reducing the effects of resistance.

But for most set ups (those with speakers within 100 ft of the amplifier), 16-gauge lamp cord is fine.

For speakers 100 to 200 ft.

from the amp, experts suggest use 14 gauge..

Is it OK to oversize wire?

Yes, you can oversize a wire. You can use #12 on a 15a circuit or #10 on a 20a circuit. … If you feel safer with # 12 on a bedroom circuit, then you might as put it on a 20a breaker. You will have more ampacity, more efficient.

What happens if you use the wrong gauge wire?

The purpose of any wire is to transfer current a certain distance with the least amount of resistance. If too small of a size is used, the wire could melt because of the large amount of current flowing through it compared to how much the cables can handle. …

How many watts can 14 gauge speaker handle?

750 watts14 AWG Speaker Wire can handle up to 750 watts of power at 20 ft Cable Runs: 14 guage speaker wire can carry up to 750 watts of power with 20 ft of speaker wire and a 4 ohm speaker load with 37 watts lost at the speaker terminals.

How many watts can 14 gauge wire handle?

building wire14 – Wire12 – WireRecommended 80% Wattage Load: 1440 watts (120 volts). Max Wattage Load: 1800 watts (120 volts).Recommended 80% Wattage Load: 1920 watts (120 volts), 3840 watts (240 volts). Max Wattage Load: 2400 watts (120 volts), 4800 watts (240 volts).Recommended ForRecommended For4 more rows

What is the best speaker wire?

Most systems will use 16, 14 or 12-gauge AWS wire. 16-gauge copper wire can run up to 48-feet with 8-ohm speakers. So, if you want a wire size that will suit most circumstances, then a 16-gauge copper wire is probably a good fit. For speakers with a lower impedance, then you might go with 12 or 14 AWG just to be safe.

Does length of speaker wire affect sound?

It’s also important that the wire lengths to both speakers are the same to ensure they both have equal impedance values. … The thicker a wire or the lower the gauge, the less resistance. It is therefore a combination between speaker impedance, length and gauge that affects the resistance.

Do banana plugs affect sound quality?

Why Banana Plugs. There are many benefits of using banana plugs with your speaker wire. Not only do they help your installation to look cleaner, banana plugs also give you a permanent and high quality connection. … Wires tend to get pulled out or frizzy as time passes, which can affect your sound quality.

Can I use electrical wire for speakers?

To answer the question posed at the start of this article – yes, you can use a regular electric wire as a speaker cable, as long as it comes with two same-sized conductor wires.

What happens if wire gauge is too big?

using larger wire will not hurt anything or cause any overload. The larger wire will cost more, the pathway or where it has to fit, and the physical size of the connecting means (ie. the size of terminal or clamp it has to fit in), will all be determining factors in just how big is too big.

Can you use 14 gauge wire with a 20 amp breaker?

NEC 240.4(D)(3) states that 14 AWG must be protected at 15A. You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals. … Just use the side terminals.

Does speaker wire get old?

It’s the oxidation (corrosion) that is going to cause degradation, not age per se. Copper wire can oxidize in a matter of months, or it could take years. So, it would be unfair to say “old” speaker wire is bad. Corroded speaker wire can be bad.

How many watts can 16 gauge speaker wire handle?

As with the power wire, the longer the run and the more current you’re pushing through it, the larger size you should use. For example, if your amp is in the trunk and you’re sending 100 watts to your front speakers, 14-gauge speaker wire is a good call. But if the amp is only 50 watts, 16-gauge would be fine.

Can I use 18 gauge wire for speakers?

All speakers work best with the largest gauge wire possible, 18 being the “standard”. … The manual states that up to 20 ft an 18 gauge wire is fine with 16 and 14 gauge for longer runs.

Should I use 14 or 16 gauge speaker wire?

Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine. It’s cost-effective and easy to work with.